ASJ

ASJ resistors are manufactured with sufficient margins to meeting CECC, IEC DIN, EIA, JIS and MIL standards. Through a well rounded ISO 9002 certified Quality Management System based on preventive measures, they have earned a reputation for superior quality and reliability.

- Thick Film Chip Resistors

CR Series - Thick Film Chip Resistors

The CR series resistors are manufactured with sophisticated process technology using up-to-date automated production facilities that enable production of small-size, light weight and thin components.
They are used in surface mount applications where high density of components with high performance and reliability are needed.

FEATURES
> Extremely thin and light weight.
> Highly reliable, multi-layer electrode construction.
> Compatible with wave and reflow soldering process.
> Small size with high power ratings.

---

CR Series - Ultra Low Resistance Chip Resistors

The CR series resistors are manufactured with sophisticated process technology using up-to-date automated production facilities that enable production of small-size, light weight and thin components.
They are used in surface mount applications where high density of components with high performance, reliability, precise and very low ohmic values are needed.

FEATURES
> Low resistance with tight tolerance.
> Wide resistance range.
> Extremely thin and light weight.
> Highly reliable multi-layer electrode construction.
> Small size, low resistance.

---

YCN Series - Thick Film Chip Resistor Networks

The YCN series is a chip resistor network which employ high density surface mount technology for higher productivity at reduced assembly cost and offering single component reliability.

FEATURES
> Wide resistance range.
> Suitable for automatic insertion.
> Designed to be suitable for wave and reflow soldering (including IR and VPS).
> Series with various case sizes in banks of 2,4 or 8 resistors.

---

- Metal Film Resistors

MF Series - Metal Film Resistors

The MF series Metal Film Resistors are manufactured by vacuum deposition of multiple layers of metal film on high thermal conductive ceramic rods and are coated with layers of lacquer.

FEATURES
> Low Temperature Coefficient Resistance.
> Wide Resistance Range.
> Tight Tolerance.
> Precision Performance Characteristics.

---

MFss Series - Small Size Metal Film Resistors

The MFss series Metal Film Miniature Resistors are manufactured by vacuum deposition of multiple layers of metal film on high thermal conductive ceramic rods and are coated with layers of lacquer.

FEATURES
> Miniature size.
> Low Temperature Coefficient Resistance.
> Wide Resistance Range.
> Tight Tolerance.
> Precision Performance Characteristics.

---

FM Series - Flameproof Metal Film Resistors

The FM series flameproof type Metal Film Resistors are manufactured by vacuum deposition of multiple layers of metal film on high thermal conductive ceramic rods and are coated with layers of flameproof lacquer. These resistors meet overload tests in accordance with UL-1412 specification. (UL - 1412 is the standard for fusing resistors and temperature - limited resistors without producing a fire hazard) These FM Flameproof Metal Film Resistors are designed to replace the metal oxide resistors and low power wirewound resistors.

FEATURES
> Flame proof coating meeting UL - 1412 specification.
> Wide Resistance Range.
> Low Temperature Coefficient Resistance.
> Tight Tolerance.
> Precision Performance Characteristics.

---

- Carbon Film Resistors

CF Series - Carbon Film Resistors

The Carbon Film Resistors are highly reliable. These resistors are pyrolytically deposited and manufactured in streamlined automated assembly facilities under strict quality control procedures.
The stable performance is achieved with the technology of film deposition onto a ceramic core with excellent thermal conductivity, mechanical strength and good electrical properties. Together with multi layers of epoxy coatings, the Carbon Film Resistors offer stability with long term reliability.

FEATURES
> Small size with high power ratings.
> Excellent long term stability.
> Wide Resistance Range.

---

CFss Series - Small Size Carbon Film Resistors

The Miniature Carbon Film Resistors are highly reliable. These resistors are pyrolytically deposited and manufactured in streamlined automated assembly facilities under strict quality control procedures.
The stable performance is achieved with the technology of film deposition onto a ceramic core with excellent thermal conductivity, mechanical strength and good electrical properties. Together with multi layers of epoxy coatings, the Carbon Film Resistors offer stability with long term reliability.

FEATURES
> Small size with high power ratings.
> Excellent long term stability.
> Wide Resistance Range.

---

FP Series - Flameproof Carbon Film Resistors

FP Series Flameproof Carbon Resistors are manufactured by coating a homogeneous film of pure carbon on high grade ceramic rods. They have a resistance of less than 10ohm, an electroless-deposited nickel film and are coated with layers of flameproof lacquer. These resistors meet overload tests in accordance with UL-1412 specification.

FEATURES
> Low cost.
> High power-to-size ratio for significant space savings.
> Excellent long term stability.
> Complete flameproof construction.
> Wide Resistance Range.

---

- Metal Oxide Resistors

MO Series - Metal Oxide Flameproof Resistors

These Metal Oxide Resistors offer excellent performance in applications where stability and uniformity of characteristics are desired. They provide lower cost alternatives to Carbon Composition Resistors and General Purpose Metal Films. These Metal Oxides meet overload tests in accordance with UL-1412 specification (UL-1412 is the standard for fusing resistors and temperature-limited resistors without producing a fire hazard).

FEATURES
> High power to size ratio for significant space savings.
> Flameproof.
> Low cost, high performance.
> Excellent long term stability.
> High surge/overload capability.

---

MOss Series - Miniature Metal Oxide Flameproof Resistors

These Miniature Metal Oxide Resistors offer excellent performance in applications where stability and uniformity of characteristics are desired. They provide a smaller size for PC board application with high performance and precision to replace wirewound resistors and high power resistors. Miniature Metal Oxides meet overload tests in accordance with UL-1412 specification.

FEATURES
> High power with small size for significant space savings.
> Flameproof.
> Low cost, high performance.
> Excellent long term stability.
> High surge/overload capability.

---

- Wirewound Resistors

SQP Series - Wirewound Resistors, Rectangular Axial Lead

Wirewound resistors are used as pure power components. Apart from power characteristics, the impulse strength of wirewound resistors is higher, capable of withstanding higher load ratings without damage when compared against other type of fixed resistors.

FEATURES
> Exceptionally small, sturdy and mechanically safe.
> Excellent electrical characteristics.
> Flame, arc and moisture resistance as well as self extinguishing capabilities.
> Ability to withstand rigorous load test.
> Applicable specifications : EIA RS-344 and EIA RC-649.
> Non-Inductive type NSQP available up to 50ohm maximum.

---

KNP Series - Wirewound Resistors, Flameproof Coating

The KNP series resistors are fabricated using a fibreglass or ceramic core with the resistance wire securely crimped to the terminals.

FEATURES
> Exceptionally small, sturdy and mechanically safe.
> Excellent electrical characteristics.
> Flame, arc and moisture resistance as well as self extinguishing capabilities.
> Ability to withstand rigorous load test.
> Applicable specifications : EIA RS-344 and EIA RC-649.
> Non-Inductive type NKNP available up to 50ohm maximum.

---

SQZ Series - Wirewound Resistors, Rectangular PCB Mounting

Wirewound resistors are used as pure power components. Apart from power characteristics, the impulse strength of wirewound resistors is higher, capable of withstanding higher load ratings without damage when compared against other type of fixed resistors.

FEATURES
> Exceptionally small, sturdy and mechanically safe.
> Excellent electrical characteristics.
> Flame, arc and moisture resistance as well as self extinguishing capabilities.
> Ability to withstand rigorous load test.
> Applicable specifications : EIA RS-344 and EIA RC-649.
> Space saving and stand-off type.
> Flameproof
> Non-Inductive type NSQZ available up to 50ohm maximum.

---

SQH Series - Wirewound Resistors, Rectangular Clamp Mounting

Wirewound resistors are used as pure power components. Apart from power characteristics, the impulse strength of wirewound resistors is higher, capable of withstanding higher load ratings without damage when compared against other type of fixed resistors.

FEATURES
> Exceptionally small, sturdy and mechanically safe.
> Excellent electrical characteristics.
> Flame, arc and moisture resistance as well as self extinguishing capabilities.
> Ability to withstand rigorous load test.
> Applicable specifications : EIA RS-344 and EIA RC-649.
> Small size with high power ratings.
> Flameproof.
> Non-Inductive NSQH available up to 50ohm maximum.

---

SQM Series - Wirewound Resistors, Rectangular Radial Lead

Wirewound resistors are used as pure power components. Apart from power characteristics, the impulse strength of wirewound resistors is higher, capable of withstanding higher load ratings without damage when compared against other type of fixed resistors.

FEATURES
> Exceptionally small, sturdy and mechanically safe.
> Excellent electrical characteristics.
> Flame, arc and moisture resistance as well as self extinguishing capabilities.
> Ability to withstand rigorous load test.
> Applicable specifications : EIA RS-344 and EIA RC-649.
> Space saving stand-off type.
> Small size with high power ratings.
> Flameproof.
> Non-Inductive type NSQM available up to 50ohm maximum.

---

- Zero Ohm Resistors

Z Series - Zero Ohm Resistors

Jumper wires or crossovers, as they are sometimes called, are basically interconnection devices between points on a P.C. Board. Generally they are used for the following reasons:
> Inability to connect two points on a P.C. Board due to other circuit paths which must be crossed over.
> An after-the fact design change that requires new point connections.
> Circuit tuning by changing point connections.
Jumper wires offer a quick simple solution to these problems. They are most suitable for automatic machine insertion on lead tape and are available in all packaging styles including precut and formed leads for manual insertion.

Click Here