Fargo Telecom

Fargo Telecom Holdings is a global value-added distributor focusing on the provision in support of end-to-end wireless connectivity solutions.  These solutions enable wireless connectivity for wireless, data, voice, fax and Internet requirements.  Fargo Maestro 20 (GPRS class 2) and Fargo Maestro 100 (GPRS Class 10) are external Industrial dual band GSM modems in 900/1800 MHz. They can be quickly connected to the serial port of a desktop or notebook computer through their RS 232 interface for remote connections.

Maestro 20

Fargo Maestro 20 (GSM and GPRS Class 2, 2RX + 1TX)

The connection is made easily through the RS 232 interface, Maestro's metal casing makes it an appropriate solution for tough applications such as Telemetry, Wireless Local Loop (payphones) or as part of a fleet management system.

Their small size make them simple to integrate in a space constraint environment. One programmable I/O port for connection with external device.

Very small size: 88mm x 60mm x 26mm
Voice, fax, SMS and DATA capable.
GSM and GPRS.
Maximum Power: 2W (900MHz) - 1W (1800MHz)
Fully type approved : R&TTE (GSM approval).
CE approved (applicable Electro Magnetic Interference Compatibility and Safety regulations)
WIRELESS CONNECTION.
AT command based (GSM 07.05 and 07.07)

Voice features:

- Telephony
- Emergency calls
- Full Rate, Enhanced Full Rate and Half Rate (FR/EFR/HR)
- Dual Tone Multi Frequency Function (DTMF)

Data/Fax features:

- Data circuit asynchronous, transparent and non transparent up to 14,400 bits/s
- Automatic fax group 3 (Class 1 and Class 2)
- MNP2m V.42bis

Short Messages Services features:

- Text and PDU
- Point to point (MT/MO)
- Cell Broadcast

Interface Connections:

- SIM holder
- 15 pin Sub-D connector (serial and audio connection)
- 4-pin power supply connector (micro-FIT 3.0)
- SMA antenna connector (50 ohm)

---

Maestro 100

Fargo Maestro 100 (GSM and GPRS Class 10, 4RX + 1TX or 3RX + 2 TX)

The connection is made easily through the RS 232 interface, Maestro's metal casing makes it an appropriate solution for tough applications such as Telemetry, Wireless Local Loop (payphones) or as part of a fleet management system.

Their small size make them simple to integrate in a space constraint environment. One programmable I/O port for connection with external device.

Very small size: 88mm x 60mm x 26mm
Voice, fax, SMS and DATA capable.
GSM and GPRS.
Maximum Power: 2W (900MHz) - 1W (1800MHz)
Fully type approved : R&TTE (GSM approval).

CE approved (applicable Electro Magnetic Interference Compatibility and Safety regulations)
WIRELESS CONNECTION.
AT command based

Voice features:

- Telephony
- Emergency calls
- Full Rate, Enhanced Full Rate and Half Rate (FR/EFR/HR)
- Dual Tone Multi Frequency Function (DTMF)

Data/Fax features:

- Data circuit asynchronous, transparent and non transparent up to 14,400 bits/s
- Automatic fax group 3 (Class 1 and Class 2)
- MNP2m V.42bis

Short Messages Services features:

- Text and PDU
- Point to point (MT/MO)
- Cell Broadcast

Interface Connections:

- SIM holder
- 15 pin Sub-D connector (serial and audio connection)
- 4-pin power supply connector (micro-FIT 3.0)
- SMA antenna connector (50 ohm)

To request more information, pricing or to contact a sales representative at Fero.