Chemicals

Fero specialises in chemical and production solutions and distributes an extensive range of sprays, greases, oils, liquids and additives for applications over a wide range of industries. We have aligned ourselves with a number of high quality suppliers giving customers the benefit of proven research development and production of specialised chemical products. We have an extensive range of over 100 products ex stock, most also available in bulk quantities and packaging.

For custom-applications we can arrange large quantities to be modified to your specifications.

RANGE: Airduster Minimal charge freezer Non-silicone heat transfer compound Silicone heat transfer compound Thermally conductive rubber Lint-free paper wipes Gloves (latex and cotton) ESD hand lotions

APPLICATIONS: Heat sinking of semiconductors Removing particles from inaccessible areas on delicate equipment Fault finding in electronics Work shop, service van or production line

FEATURES: Suitable for static sensitive devices High thermal conductivity Non-creep characteristics Economic and easy to use Wide operating temperature range Packed in convenient sized containers for all applications Protection from overheating

     

---

AGENCIES

Electrolube
 

ASA

Antistatic Spray
- Powerful non-foaming cleaner which also prevents static build up
- Long term effect
- Non-flammable
- Suitable for use on screens and bench tops
- Also suitable for use on fabrics

Our Codes:
EASA250 - 250ml Spray     Click here to order now

---

BLV/BLR

Bloc'lube
- Tamper evident seal for potentiometers etc
- Green or Red
- Supplied with integral brush

Our Codes:
EBLG15BE - 15ml Bottle (Green)     Click here to order now
EBLR15BE - 15ml Bottle (Red)     Click here to order now

---

EAD

 

- Inert, pure compressed gas for dust removal
- Ideal for removing particles from inaccessible areas on delicate equipment
- Non-flammable



Our Codes:
EAD200D - 200ml Aerosol     Click here to order now
EAD400D - 400ml Aerosol     Click here to order now

---

GDP

- High powered airduster with powerful initial blast and minimal drop off
- Non-flammable, pure compressed gas
- Use to remove dust and dirt from delicate and inaccessible areas.
- Use in short, sharp bursts to avoid can frosting

Our Codes:
EGDP400 - 400ml Aerosol     Click here to order now

---

LRM

Label Remover
- Paper label remover
- Suitable for EPROMS, also useful around the office
- Aerosol with brush enables mechanical scrubbing action to aid removal
- Handy pen version available
- Harmless to most plastics

Our Codes:
ELRM200D - 200ml Aerosol     Click here to order now
ELRM200DB - 200ml Aerosol with Brush     Click here to order now
ELRM01L - 1Ltr Bottle     Click here to order now

---

MCF

Minimal Charging Freezer
- Fast fault finding in electronics
- Suitable for static sensitive devices
- Unique additive minimises static build up whilst still allowing frost formation
- Protection from overheating
- Cools to -55ºC

Our Codes:
EFRE200D - 200ml Aerosol     Click here to order now
EFRE400D - 400ml Aerosol     Click here to order now

---

SCP

Silver Conductive Paint
- Highly conductive silver loaded paint
- Ideal for track repair and pinpoint shielding
- Fast drying
- Excellent adhesion to most substrates

Our Codes:
ESCP03B - 3ml Vial     Click here to order now
ESCP26G - 26ml Bottle     Click here to order now

---

DTP

Paint Stripper
- Extremely powerful paint and varnish remover
- Can be used for removing graffiti
- Suitable for removing varnishes on wood
- May be removed simply by brushing
- Not to be used on plastics

Our Codes:
EDTP400 - 400ml Aerosol     Click here to order now

---

MPU

Polyurethane Foam
- One-part ready to use self-expanding PU foam
- Cures quickly to form a tough, waterproof layer
- Excellent for filling and
sealing spaces around cables, window frames,
pipe ducts, etc.
- Provides good thermal and acoustic insulation

Our Codes:
EMPU500 - 500ml Aerosol     Click here to order now

---

PGB/PGM

Galvanising Spray
- Cold galvanisation paint for metal surfaces
- Protects against oxidation and corrosion
- Very fast drying with excellent adhesion properties
- May be used as a primer for fixing lacquers
- Available in gloss and matt finishes

Our Codes:
EPGB400 - 400ml Aerosol (Gloss)     Click here to order now
EPGM400 - 400ml Aerosol     Click here to order now

---

APB

Air Powered Bottle
- Achieves 'aerosol' results without the use of propellant
- 300ml HDPE bottle holds a maximum 200ml of fluid
- Compatible for use with IPA and aqueous solutions

Our Codes:
EAPB200 - 200ml Bottle     Click here to order now

---

DEI

Demineralised Water
- Provides a final polish to circuit boards and assemblies that have been cleaned and rinsed in tap water
- Ideal for use with Safewash
- Suitable for use in trigger spray bottle (ETSB600) or air powered bottle (EAPB200)

Our Codes:
EDEI1 - 1Ltr Bottle     Click here to order now
EDEI5 - 5Ltr Bottle     Click here to order now

---

ULS

Ultrasolve
- Fast drying solvent for quick and efficient cleaning of electrical equipment
- Excellent removal of grease, oil, flux residues and acrylic conformal coatings
- Leaves clean, dry surface
- Compatible with most plastics

Our Codes:
EULS200D - 200ml Aerosol     Click here to order now
EULS400D - 400ml Aerosol     Click here to order now
EULS400DB - 400ml Aerosol with Brush     Click here to order now
EULS01L - 1Ltr Bottle     Click here to order now
EULS05L - 5Ltr Bottle     Click here to order now

---

CG53A

Contact Grease
- Contact grease with excellent electrical properties
- Very good plastics compatibility
- Luer lock syringe dispenser
- Good high and low temperature performance,
-40ºC to +125ºC
- Ideal for automotive switches

Our Codes:
ECG53A35SL - 35ml Tube     Click here to order now

---

SGB

2GX Contact Treatment Grease
- High quality, non-melting contact grease
- Lubricates switches and electrical contacts
- Reduces contact wear and arcing
- Excellent plastics compatibility
- Applicable for high and low voltage

Our Codes:
ESGB200D - 200ml Aerosol     Click here to order now

---

SOB

2X Contact Treatment Oil
- Contact oil for switch and contact applications
- Non-flammable and silicone free
- Good mechanical properties
- Reduces arcing and hence contact wear

Our Codes:
ESOB200M - 200ml Aerosol     Click here to order now

---

EPE

Permagard
- De-watering and penetrating fluid
- Good lubricant
- Loosens seized metal parts
- Protects against rust and corrosion

Our Codes:
EPE400H - 400ml Aerosol     Click here to order now

---

HTG

High Temperature Grease
- High quality mechanical grease for lubrication and protection
- Wide temperature range of -20ºC to +200ºC (does not harden at high temperature)
- Fortified with anti-wear and anti-oxidant additives
- Water resistant

Our Codes:
EHTG50T - 50ml Tube     Click here to order now

---

 

SCO

Silicone Grease Compound
- High quality, multi-purpose electrical insulating compound
- Excellent water and moisture repellency
- Chemically inert, odourless and non-toxic
- Excellent resistance to tracking and corona discharge

Our Codes:
ESCO200D - 200ml Aerosol     Click here to order now

---

SPG

Special Plastics Grease
- Excellent plastics compatibility
- Offers outstanding low temperature performance
- Efficient mechanical lubricant for plastic/plastic or plastic/metal friction
- Ideal to reduce wear in timers, plastic cogs and gears etc.

Our Codes:
ESPG35SL - 35ml Syringe     Click here to order now

---

APL

Acrylic Protective Lacquer
- Offers excellent adhesion to all substrates
- Good temperature range and dielectric properties
- May be soldered through, allowing easy repair
- UV trace for inspection
- May be removed with solvents such as Ultrasolve (ULS)

Our Codes:
EAPL400H - 400ml Aerosol     Click here to order now

---

PCM

Peelable Coating Mask
- Flexible latex for masking components
- Completely hand-peelable, leaving no residue
- Solvent resistant and does not contaminate conformal coatings
- Dries at room temperature
- High film strength, does not break easily

Our Codes:
EPCM250ML - 250ml Bottle     Click here to order now

---

SRC

Silicone Removable Coating
- Solvent removable, silicone conformal coating
- Good adhesion and humid ageing properties
- May be soldered through safely
- Good operating temperature range
- Excellent surface resistivity

Our Codes:
ESRC400 - 400ml Aerosol     Click here to order now

---

TFCF

Fluorocoat Surface Modifier
- Thin film coating offering excellent moisture resistance
- Assemblies can be coated without masking
- Applies a very thin film which breaks when connectors, etc are inserted
- Contains UV trace for easy inspection

Our Codes:
ETFCF200 - 200ml Aerosol     Click here to order now

---

GRG

Graffiti Remover Gel
- High viscosity gelled product - clings to vertical surfaces
- Low odour, low volatility - longer contact time
- Removes graffiti from porous and semi-porous surfaces, e.g. wood and brick
- Harmless to most plastics and metals
- Effective and economical to use

Our Codes:
EGRG400 - 400ml Aerosol     Click here to order now

---

GRS

Graffiti Remover for Sensitive Surfaces
- Removes graffiti from porous and semi-porous surfaces, e.g. vinyl and laminates
- Pleasant light odour
- Contains non-chlorinated solvents
- Compatible with most plastics and metals

Our Codes:
EGRS400 - 400ml Aerosol     Click here to order now

---

HTC

Silicone-free Heat Transfer Compounds
- Silicone-free thermal pastes
- Excellent non-creep characteristics
- Excellent thermal conductivity - HTC 0.9 W/mK and HTCP 2.5 W/mK
- Easy and economic to use

Our Codes:
EHTC2SL - 2ml Syringe     Click here to order now
EHTC10SL - 10ml Syringe     Click here to order now
EHTC20SL - 20ml Syringe     Click here to order now
EHTC35SL - 35ml Syringe     Click here to order now
EHTC01K - 1kg Tin     Click here to order now

---

HTS

Silicone Heat Transfer Compound
- Silicone based heat transfer pastes
- Excellent non-creep properties
- Superior thermal conductivity HTS 0.9W/mK
- Wide operating temperature range -50ºC to +200ºC with low evaporation weight loss

Our Codes:
EHTS35SL - 35ml Syringe     Click here to order now

---

TCR

Thermally Conductive Silicone RTV with high thermal conductivity (2W/mK).
Operates from from -50ºC to +230ºC and RTV cures in 24 hours at room temperature or 45 minutes at 100ºC

Our Codes:
ETCR - 100ml Tube     Click here to order now

---

TBS

Thermal Bonding System
Two part epoxy bonding system with a thermal conductivity of 1.1W/mK. System Eliminates need for Bonding mechanical fixings by providing a permanent bond.

Our Codes:
ETBS20S - 20ml Syringe     Click here to order now

---

SMA

Surface Mount Adhesive
- One part UV resistant system with high green strength and dot profile
- Excellent mechanical strength
- Resistant to cleaning solvents
- Long term stability after cure cycle
- Syringe can be used by hand or dispensing equipment

Our Codes:
ESMA10SL - 10ml Syringe     Click here to order now

---

SMFL

Surface Mount Rework Flux
- Quick drying, no clean, MIL approved flux
- Can be used with hot air, hot gas or conventional soldering techniques
- Non tacky and no corrosive residue
- Very high reliability

Our Codes:
ESMFL200D - 200ml Aerosol     Click here to order now

---

RRR

Rubber Roller Restorer
- Restores texture to rubber rollers in office equipment
- Prolongs the lifetime of rubber rollers, preventing costly replacement
- Supplied in pump spray
- Leaves no residue
- Dissolves ink, oil, grease and will remove general office dirt

Our Codes:
ERRR250 - 250ml Aerosol     Click here to order now

---

ER2001

Epoxy Resin
Black medium viscosity, general purpose, flame retardant to UL94V-0, excellent electrical insulation characteristics.
Ideal for potting PCBs, coils, transformers & mould casting

Our Codes:
ER2001 - 250gm Pack     Click here to order now

---

ER2074

Epoxy Resin
White thermally conductive, flame retardant, no abrasive fillers.
Ideal for potting PCBs, power supplies, DC-DC converters & temperature sensors

Our Codes:
ER2074 - 250gm Pack     Click here to order now

---

UR5044

Polyurethane Resin
Blue Flame retardant, low hardness , digoutable does not cause stress on delicate units.
Ideal for prototype circuitry, silicone replacement, control circuits for automotive suspension units, mechanical shock and vibration proofing

Our Codes:
EUR5044 - 250gm Pack     Click here to order now

---

UR5048

Polyurethane Resin
Clear Digoutable, clarity of material allows fast fault finding, hydrophobic, excellent protection from thermal and mechanical shock.
Ideal for encapsulation of delicate components e.g ferrites, glass reed switches and coils

Our Codes:
EUR5048 - 250gm Pack     Click here to order now
.

ADDITIONAL INFORMATION:

Download the Electrolube catalogue from here.

Full data sheets, msds forms and samples are available.  Please contact your account manager or complete the enquiry form.

 

---

To request more information, pricing or to contact a sales representative at Fero.